Steel Roof Cost Estimator
House of Steel, Inc.
10227 Route 219
Springville NY 14141
(716) 592-0117
Please add 10% to get a more accurate estimate.
Job Name:
Select the type of steel:
What length panels do you need? A ft in
(This is the measurement from Ridge to Eave.)
(The minimum panel length is 12" (1 foot) and the maximum is 40 feet)
How wide is your roof? B ft
Panels provide 3' coverage, so you will need this many
to cover ONE side of your roof:
Price ea Total
Enter the number of panels you would like quoted:
Enter additional panel lengths and quantities you may need below.
(Example: dormer, lean to, additions, etc.) Qty
ft in
ft in
ft in
ft in
Trims (unless otherwise specified, all trims are 10' 3" long)
C-Channel $ 10.40
Chimney Flash $ 24.05
Denver Eave $ 13.00
Denver Eave 2-1/2" $ 8.45
Drip Edge 1" $ 6.83
Drip Edge 1" - Aluminum (White or Brown) $ 3.98
Drip Edge 2" $ 8.13
Drip Edge 2" - Aluminum (White or Brown) $ 6.57
Endwall (must know pitch of roof) $ 15.60
Fascia 6" $ 9.75
Fascia 6" - Aluminum (White or Brown) 12' $ 11.56
Fascia 8" $ 12.35
Fascia 8" - Aluminum (White or Brown) 12' $ 15.20
F-Channel $ 6.83
F-Channel - Aluminum (White or Brown) $ 6.74
FJ Trim $ 10.40
Gable (Rake) $ 14.30
Outside Corner $ 17.71
Ridge cap Based on the width of your roof, you would need this many pieces of Ridge Cap, but you will need to enter a quantity at right. $ 17.55
Sidewall (always 90 degree angle) $ 15.60
Transition $ 15.60
W Valley (McElroy) $ 31.20
W Valley (Union) $ 26.98
Soffit - Vented, Aluminum, White or Brown, 16" W x 12' L $ 19.68
Other Accessories
Based on the square footage of the steel panels you entered above, it looks like you will need this many bags of 1" screws, but you will need to enter a quantity in the 1" galvanized or stainless steel screws line below.
1" Screws, galvanized, painted, bag of 250 $ 11.00
1" Screws, stainless steel, painted, bag of 250 $ 24.00
Based on the number of Ridge cap trims you entered above, it looks like you will need this many bags of 1-1/2" screws, but you will need to enter a quantity in the 1-1/2" galvanized or stainless steel screws line below.
1-1/2" Screws, galvanized, painted, bag of 250 $ 13.00
1-1/2" Screws, stainless steel, painted, bag of 250 $ 26.00
Closure - outside, solid, 3' strip (for use at the Ridge) $ 0.80
Closure - outside, vented, 3' strip (for use at the Ridge) $ 3.30
Closure - outside, Profile Vent Max Rib, Sold by Foot. Enter feet -> $ 2.00
Closure - inside, solid, 3' strip (for use at the Eave) $ 0.80
Based on the length and width of your roof it would take this many feet of furring strips (1 by) to cover ONE side, but you will need to enter a quantity in the field below.
1 by (rough cut Tulip/Cucumber 1" x 3") enter total feet needed $ 0.20
Other items (manually enter items, quantities and price ea for other items)
Prices subject to change at any time. Sub-Total
This estimator is designed to give you a good ballpark cost of the materials
needed to roof your building. Additional items may be needed.
Bring this estimate in with you or call for more info.
Add 10% to get a closer estimate.		 8% Sales Tax
Total